Electric Power Distribution Analysis Software ( PADEE )
	MATMOR Page | Contacts | PADEE Descriptions | Español

Electric Power Distribution Network Analysis, Design and planning in low and medium voltage based on CAD-CAE-GIS

This Software takes the electric data directly from distribution networks maps in Autocad and analyzes them (running load flow analysis), placing the results directly on maps automatically and interactively. This Tool is for Designing, Planning, operation, maintenance and loss reduction in feeder mostly used by utilities and consultants who work in Electric Power distribution Systems. It connects the medium voltaje, Low voltaje and Users systems under an integrated and common system

It uses maps done in CAD and along with the special blocks library produce the Geographic Information System (GIS), Or Distribution Data System Management (DDSM), being very useful to handle the large amount of data of the distribution networks.

The user’s manuals guides you through all stages; from information pickup or inventory to the load flow analysIs and Proyects elaboration. It should be mentioned that users are our main software salesmens.

Clic to PADEE Explanation Details  Clic here to watch a Power Point Presentation PADEE carries out all the necessary tasks for planning, designing and operation of Electrical Power Distribution Systems. Works with Autocad version from 2000 to 2010, being indifferent which version is used, nevertheless is to remember that the new versions require better computer hardware and memory. The recommended operating systems are Windows XP, Vista and WIndows 7 32 Bits. Older Windows version win98, 2000 or Windows NT stop being supported in 2008 and earlier. The new PADEE versions allow the installation of Autocad in Virtual Servers. The PADEE was proven on the new Virtual Server technology, with a total success, in CADAFE facilities. The PADEE users manual have tutorials and aides to help it use. It have friendly menus and messages of errors with advice of how avoiding them. In the following address you can download the up-to-date Frequent questions Asked manual Frecuently Asked Questions With the new version (2009) program COMWIN can be instaled on a server, the main data base and working data can be use simultaneous by users. Beginning on Feb,25th 2008 a new option in the Operations and interruptions Module, Distribution Operation Controllers (DOC) can mark the unavailable Switches and cutouts reducing the outage time with an operations that can't be executed. This option was made at the request of Carabobo DOC users PADEE had several new modules: The PSCADA module, visualizes and operate the feeders Switches in line and from the MAP in Autocad. Also it can read substation and feeder demands. There is Paper that can be downloaded that shows the Viewfinder software that link the remote measuring device with the PADEE Paper ViewfinderLoad V5 in pdf (211 kb) The PUBSAT module, with GPS technology allows to visualize the location of the maintenance crews. The PATOTE module, visualizes the totalizers installed in the network to aim to discover nontechnical losses The PPTEIS module, calculates the technical losses and to summarize all the information of the network required by official departments The PFALLA module, that visualizes the geographical place where a system fault was recorded and can be presented filtered by different criteria scope. The PACREC module, which visualizes the affected users by a fault and help to locate the failed equipment in order to reduce system downtime. Some of the last proyects carried out with the PADEE are listed next Inventory, planning and remodeling of the low and medium voltage Power Distribution Networks of San Diego de Caburtica The conversion to export data to Siemens's SINCAL was updated Update Manteca, Ripon and Escalon Inventory for SSJID, California, USA, through Siemens PTI. Courses Dictation to 12 PADEE Engineers and technicians of ELEBOL and 13 engineers of CADAFE for Planning and Expansion of the Electrical System in CADAFE Several inventory and information rise for some cities for by PCPm, CADAFE Reactive compensation projects, within the Agreement with CUBA, by other consultants companies Advanced PADEE training courses for 61 CADAFE- CARACAS Engineers and technician dictated between October and December of the 2007. Planning of Distribution System of the Heres District (Ciudad Bolivar) Inventory of Distribution Networks of Macagua (another contractor) Company CIELEMCA, is working with the PADEE in the CADAFE's SIGMA project Short and Medium term Planning for Valencia City (ELEOCCIDENTE) by CADAFE's Engineers Remodeling of the towns of Las Claritas (another contractor) PADEE was used to collaborate with the study of the technical losses for distribution networks (Project of Siemmens PTI) Also the PADEE was used to produce the data in the demonstration of SINCAL that will replace old version ADEPT (both of Siemens) Information Rise of Distribution networks and subscribers of the commercial offices Maracay III, Maracay IV and El Limon	CADAFE already has PADEE 2009 version, update No 32 is required, the former users can download the update number 26 + 32 to avoid reinstalling the software again. All the other intermediate archives was erased from server to guarantee the users, the downloading of the last version (who can be automatically downloaded using the ACTUALIZAR.exe program of the C:\padee folder With this las version, it is possible “identified and renumbering feeder nodes” involved in a fault and continued conducting the operations without returning to “identificar” all the feeders again. This is very useful for the operation in the DOC From Update No 6 (now No 26 + 32), the MVACC1f will be introduced according to CADAFE convension. (it will not be necessary to multiply by 3), furthermore it includes program NCOPOTE for the consecutive numeration of elements of the network After update number 20, transformers search can be done within a polyline in MACROS->BUSQUEDAS->BUSCAP, besides a series of improvements that helps updates of the Autocad version and the Windows operating systems From Oct/2009, is available the COMWIN program update No 15, that can be downloaded using the program ACTUALIZAR from COMWIN folder. Animations of PADEE examples, are available. This Link allows download a Zip file which contains the animations and the winplayer program to visualize the content. Please download the, unziped and reads the leeme.txt file and follows the instructions. (to return click back button < - from the Explorer) The Present version is the 2009, the first version of the PADEE was available on April, 13th 2006 and it improves and completes the old sidmat version. At the moment the PADEE is available for Autocad 2010 and its Architectural, Mechanical and MAP versions All the collaterals data bases required to work with the modules of Inventory, Calculations, and Maintenance are located in the folder \ data \ underneath the folder that contains the map files in Autocad. The PADEE allows placing maps in geographic references, allowing measuring distances directly from the map. In order to install the PADEE in a newer Autocad version, you need to execute the c:\padee\autocad\INSCADPA.EXE installer. The same procedure is needed when another user wishes to use the PADEE in a same PC and Windows XP. In Vista Windows the same USERKEY will need to be introduce again. The new “UPDATE” option allows the maintenance and automatic update of all the programs. It is only necessary to execute the program and it will verify if updates exist and download it automatically to maintain software to up to date. www.matmor.com Clients - Cadafe and in all subsidiary branches - ELEVAL Electricidad de Valencia - Calife Luz y Fuerza de Puerto Cabello - CVG-EDELCA Electrificación del Caroní - Lasmo Petrozuata Downstreem ( Antes ENI-LASMO ) - CIELEMCA ( PPI, PARS, COMWIN, PPTL ) - OA Asociados - KW ingeniería - Seneca (only work budged calculations) - Deproex (only electric line topography profile) - KADIM (only electric line topography profile) - TURBOVEN, CONSORCA, CIVELEC, Sr. Puertas, Sr. Edesio Roa y Sr. Tito Marquez (only work budged calculations) - ENELVEN has a DEMO version Altogether they are about of 250 seats with this software http://www.hit-counter-download.com
Redomended LINKs: www.autodesk.com                    www.mcneel.com                www.winzip.com www.mcafee.com                       anti spyware                          www.yahoo.com www.google.com                       earth.google.com                   www.lycos.com www.freeservers.com                MemorySuppliers.com (memorias y componentes para PC)                           www.pdf2exe.com                      www.pdf2exe.com/reader.html